Prototype Simulation Model · synthetic values are calculated locally from operating assumptions.
Explainable condition → prediction → reason → action → impact logic. This is an operator copilot, not a generic chatbot.
Condition
Reservoir temperature declining
Prediction
Viscosity increasing; inflow will reduce.
Reason
At lower thermal support, heavy-oil viscosity rises and mobility drops.
Action
Advance CSS window and reduce SPM to 6.2.
Impact
Protect fillage, stabilize production and reduce rod impact.
Condition
Steam volume above response optimum
Prediction
SOR and energy/bbl will increase without proportional rate gain.
Reason
Excess steam after thermal saturation raises consumption rather than useful mobilization.
Action
Use 400 t at 8.5 bar with 42 h soak.
Impact
Target 108 BOPD at SOR 4.1 and 84% energy.
Condition
SRP matched to inflow
Prediction
Rod-floating risk remains at 18%
Reason
Pump displacement must be balanced against thermal inflow and fluid level.
Action
Reduce SPM to 6.2 and stroke to 44 in.
Impact
Increase pump efficiency, lower impact load and extend equipment life.
Current control state: 450 t steam · 7.5 SPM · 48 in stroke.